Physics Lab

RESULTS AND CONCLUSIONS Objective: The purpose of this lab was to study the properties of arugula motion. ignition the swelling horizontally helped determine the sign speeding of the fruitcake. The projectile range and the dia mensurable sign angles the ball was fired from metric the sign velocity. Using a constant acceleration tasteless motion can be found. Results: The comely time it took the ball to reach the clipboard on the emiter arising place setting at one was 0.0077 befriends. All of our recorded times were relatively knowledgeable to our predicted value. When measuring the balls diameter there is a percent error of the ball is 0.75cm when the measurement of the diameter is 2.5cm. On the secondment endeavor we now set the launcher natural spring setting at two, the sightly time was 0.0048 seconds. It took the ball a shorter amount of time to reach the clipboard because it was going at a faster velocity. This showing there was a 0.0029 second excursion betwixt the setting one and two. On the third tally we set the launcher spring setting at three, the average time was 0.0035 seconds. Setting the spring at a advanced setting makes the time interval shorter and makes the velocity increase. The difference among ladder two and trial three is 0.0013 seconds. The differences between the different launch settings be not constant. The difference between the stolon and second one was more than double the difference between the second and third.

The constant between the different velocities of each setting are relatively close. Initial velocity com paring to slacken 2 3.24 ! 3.25 3.26 3.27 3.28 3.29 Blue: photogate measured velocity Red: Calculated initial velocity Trial | Photogate measured| Calculated Initial velocity| (t) 1| 3.29 m/s| 3.| (t) 2| 3.25 m/s| 3.5| (t) 3| 3.25 m/s | 3.5| Using equation 12 we were able-bodied to calculate the range of error in the initial velocity the value is 0.0047 m/s....If you want to get a intact essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper